Installation Guide

4002804 Rev C QPSK (Release A63) Software Upgrade and Installation Instructions 9
About This Upgrade, Continued
CR Number
Subscriber
Cable Service Provider
14309
Temporary inability to get or use
two-way connection. A
sustained high rate of small
packets of upstream traffic
causes a QPSK modulator to
reboot.
Note: This is not typical usage.
No impact
20337
No impact
As a craft port user, if you type
stblist without a number
parameter when a large
population of DHCTs is signed
on, the entire list of DHCTs is
printed. This can lead to a QPSK
reboot.
Work around:
When using QPSK craft port,
type the stblist command with a
small number (<500) as a
parameter to avoid the QPSK
rebooting.
24997
No impact
The extended range reverts to
the default range when only the
PPC reboots.
26882
To avoid reboots, QPSK Mod
processing needs to be enhanced
to more quickly process DHCT
verification requests.
No impact
26987
Temporary inability to get or use
two-way connection. The QPSK
reboots when attempting to send
too many alarms to DNCS.
No impact