Installation Guide

4002804 Rev C QPSK (Release A63) Software Upgrade and Installation Instructions 3

Overview, Continued

System Release 2.1.1 and System Release 3.0.1

For more information about SR 2.1.1 and SR3.0.1, refer to the following documents:

 System Release 2.1.1 Release Notes, part number 4002061

 SR 3.0.1 Release Notes, part number 4002058

 SR 2.1.1 and SR 3.0.1 UniPack Upgrade Installation Instructions, part number 4002062

 SR 2.1.1 / 3.0.1 to SR 2.2 /3.2 CD Upgrade Installation Instructions, part number

4004618

 Gigabit QAM Modulator Installation and Operation Guide, part number 745431

 GQAM Software Version 1.0 Installation Instructions, part number 4003477

 Application Server Migration Procedures, part number 736097

 Application Server User's Guide for System Releases 2.1 and 3.0, for part number

749606

 Sun Fire V880 DNCS Conversion Procedures, part number 4003241

 ATM to Ethernet Network Transition Considerations Application Guide, part number

4002903

 Backup and Restore Procedures for the Digital Broadband Delivery System User's Guide,

part number 736094

 Digital Network Control System User's Guide, part number 749605

System Release 2.2 and System Release 3.2

For more information about SR 2.2 and SR3.2, refer to the following documents:

 SR 2.2 Release Notes, part number 4004065

 SR 3.2 Release Notes, part number 4004066

 SR 2.2 and 3.2 UniPack Upgrade Installation Instructions, part number 4004064

 Configuring and Troubleshooting the Digital Emergency Alert System, For Use With All

System Releases, part number 4004455

 The PowerKEY Conditional Access Module Installation Instructions, Model PKM600,

part number 736104

Document Version

This is the third release of these software upgrade and installation instructions.

References to system requirements are changed to state ―SR 2.1.1, SR 3.0.1 or

later.‖Also, a list of the documents related to SR 2.2 and SR 3.2 is added to the