Installation Guide

28 QPSK (Release A63) Software Upgrade and Installation Instructions 4002804 Rev C
Install QPSK A63 Software Onto the DNCS, Continued
15.
Select Add on the Admintool: Add Software window.
Results:
 A copyright message appears.
 The QPSK software begins to install.
16.
When the system displays a message that indicates that the QPSK software
installed successfully, press the right mouse button while the cursor is
anywhere within the Admintool: Add Software window.
Result: A Term Pane window opens.
17.
Click the right mouse button from within the Term Pane window and select
History from the resulting menu.
Result: A History menu opens.
18.
Select Store log as new file.
Result: A file directory opens.
19.
Save the file as /dvs/dncs/tmp/qpsk_inst_<Date>.out.
Note: Use today’s date in mmddyy format as <Date>.
20.
Enter to exit the Admintool: Add Software window.
Result: The Admintool: Software window reappears.
21.
From the Admintool: Software window, select File and choose Exit.
Result: The Admintool: Software window closes.
22.
Type eject and Enter.
Result: The CD ejects.
23.
Next, verify the DNCS IP address in the QPSK.config file. Go to Verifying the
DNCS IP Address, next in this section.