Installation Guide

4002804 Rev C QPSK (Release A63) Software Upgrade and Installation Instructions 27

Install QPSK A63 Software Onto the DNCS, Continued

Type df and Enter to confirm that the system mounted the CD successfully.

Result: The last line of the df command output lists the number of free disk

blocks on the CD.

Note: The number of free disk blocks existing on the CD does not matter. The

fact that the CD is listed in the df command output verifies that the system

successfully mounted the CD.

Type swmtool -d /cdrom/cdrom0 and Enter.

Result: The Admintool: Add Software window opens.

Click Cancel on the Admintool: Add Software window.

Result: The Admintool: Software window opens.

10.

From the Admintool: Software window, select Properties and choose Package

Administration.

Result: The Admintool: Package Administration window opens.

11.

Set the fields on the Admintool: Package Administration window to the

following values:

 Existing Files—Overwrite

 Existing Packages—Overwrite

 Existing Partial Installations—Ask

 Install setuid/setgid Files—Yes

 Run setuid/setgid Scripts—Yes

Note: Leave the remaining fields at their default value.

12.

Select OK on the Admintool: Package Administration window.

Result: The Admintool: Software window reappears.

13.

From the Admintool: Software window, select Edit and choose Add.

Result: The Admintool: Add Software window reappears.

14.

Click the QPSK Modulator and Demodulator option.

Result: A check mark appears.