Installation Guide

20 QPSK (Release A63) Software Upgrade and Installation Instructions 4002804 Rev C
Set DNCS Tracing Levels, Continued
7.
Repeat steps 5 and 6 for the hctmMac and hctmProvision processes (if
necessary) to update the tracing level to 2.
Example: When you are finished, the DNCS Tracing Management window
should look like the following example. The tracing levels for the hctmConfig,
hctmMac, and hctmProvision utilities are set to level 2.
8.
Click File and select Close to close the DNCS Tracing Management window.
9.
Go to What to Look for in the signonCount Data, next in these instructions.