Installation Guide

4002804 Rev C QPSK (Release A63) Software Upgrade and Installation Instructions 19
Set DNCS Tracing Levels, Continued
3.
Scroll down until the hctmConfig, hctmMac, and hctmProvision processes
come into view.
4.
Are the tracing levels for all three of these processes already set to 2?
 If yes, continue with What to Look for in the signonCount Data, next in
these instructions.
 If no, go to step 5 to begin setting the tracing levels.
Note: The Trace column lists the current tracing level.
Example: In the example in step 3, the tracing levels are all set to 0.
5.
Double-click one of the processes.
Example: Double-click hctmConfig.
Result: The Set Up Tracing window opens.
6.
To configure the Set Up Tracing window, complete the following steps.
a) In the Process Trace Level field, select 2.
b) Click Save.
Results:
 The DNCS Tracing Management window updates with the new tracing
level.
 The Set Up Tracing window closes.