Datasheet

Data Sheet
© 1992-2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 10
The adapter installs on the system planar using a dedicated connector, and eliminates the
need to take a PCI-X slot.
The RSA II SlimLine features are similar to the RSA II with the exception of the following features:
The reset button is not accessible from the back of the system.
A mini-USB cable is no longer required; the device uses an internal USB bus. The system
has a designated systems management Ethernet port, activated only when RSA II SlimLine
is installed.
An external AC adapter is not required (the device uses standby power from system power
supplies).
Status LEDs are not externally viewable.
The RSA II SlimLine no longer supports the prior RSA II interconnect function.
Tape Drive Support
The Cisco MCS 7835-I1 can support an optional 36/72-GB USB external Digital Audio Tape (DAT)
drive (part number DAT-USB-EXT-72=) or an optional USB rack-mount DAT drive (part number
DAT-USB-RM-72=). This tape drive connects through one of the USB 2.0 ports provided by the
Cisco MCS 7845-I2.
Product Specifications
Tables 1 and 2 list the configurations of the Cisco MCS 7845-I2.
Table 1. Currently Shipping Configuration
Component Value
Product part number MCS-7845-I2-CCE2
MCS-7845-I2-CCX2
MCS-7845-I2-IPC2
MCS-7845-I2-RC2
MCS-7845-I2-S31
Preload None
OS included None
Processor Dual Intel 5140 2.33-GHz 4M L2
Memory 4-GB (four 1-GB) PC2-5300R
Hard disks Four 146-GB SAS 2.5-in. hot-swap
Remote management IBM RSA II Slimline
Component Value
Product part number MCS-7845-I2-ECS3
MCS-7845-I2-CCE3
Preload None
OS included None
Processor Dual Intel E5345 2.33-GHz 2x4M L2
Memory 4-GB (four 1-GB) PC2-5300R
Hard disks Four 146-GB SAS 2.5-in. hot-swap
Remote management IBM RSA II Slimline
Component Value