System information

Polycom® Unified Communications Deployment Guide for Cisco Environments
76
3 Configure a Rule Name that is meaningful for your deployment, and select parameters
that are specific to the call routing for your environment.
a From the Target dropdown, select the Neighbor Zone configured in Task 1.
b If a numeric prefix defines endpoints registered to the DMA system, select a Mode of
Alias pattern match, Pattern type of Prefix, and then enter a Pattern string. The
example below forwards calls to extensions beginning with 72 to the Polycom DMA
system.
Task 3: Verify Bandwidth Configuration and Restrictions (Optional)
To be complete, check with the VCS administrator to confirm the Bandwidth limit settings in
VCS.
To verify bandwidth configuration and restrictions:
1 From the VCS web administration pages, select VCS Configuration > Bandwidth >
Configuration.
2 Verify the Default call bandwidth.
3 From the VCS web administration pages, select VCS Configuration > Local Zone >
Subzones.
4 For endpoints in subzones or sites that will be accessing this integration, ensure any
subzone bandwidth restrictions allow for bandwidths expected by the solution.