System information

Polycom RealPresence Platform Integration with VCS

For more information and examples on DMA scripting capabilities, please refer to the DMA

Operators Guide.

10 Click OK.

Configuring H323 Integration Between a Polycom DMA

System and VCS

You can configure VCS to route audio and video calls to Polycom endpoints or bridge resources

via an H.323 integration to Polycom DMA. To enable this integration, you need to perform steps

in both VCS and the Polycom DMA system.

For more information about the Cisco Video Communications Server, see the

Cisco VCS

Configuration Guides. For more information about Polycom DMA systems, see the

Administrator’s Guide for Polycom DMA Systems.

The following high level configuration tasks will be discussed:

• Configuring VCS for H323 Integration with DMA

• Configuring DMA for H323 Integration with VCS

Configuring VCS for H323 Integration with DMA

Perform the following steps to create an H323 integration in VCS to the DMA system and

establish the call routing infrastructure:

• Task 1: Adding a Neighbor Zone

• Task 2: Adding a Dial Plan Search Rule