System information

Polycom® Unified Communications Deployment Guide for Cisco Environments
68
For more information on VCS Regular Expressions, see the VCS Configuration Guides
.
Task 3: Verify Bandwidth Configuration and Restrictions (Optional)
To be complete, check with the VCS administrator to confirm the Bandwidth limit settings in
VCS.
To verify bandwidth configuration and restrictions:
1 From the VCS web administration pages, select VCS Configuration > Bandwidth >
Configuration.
2 Verify the Default call bandwidth
3 From the VCS web administration pages, select VCS Configuration > Local Zone >
Subzones.
4 For endpoints in subzones or sites that will be accessing this integration, ensure any
subzone bandwidth restrictions allow for bandwidths expected by the solution.
Configuring DMA for SIP Integration with VCS
On the DMA system, you need to configure an external SIP peer for VCS. This allows the DMA
system to route and receive SIP calls to devices registered to VCS.
Perform the following tasks:
• Task 1: Configuring a SIP Peer
• Task 2: Setting up a Dial Rule