System information

Direct Registration of Polycom RealPresence Systems with CUCM
37
Task 5: Configuring Participant Properties for Dial Out Calls (Optional)
From the RMX interface, you can create a conference and add Participants to be dialed. These
participants can also be saved to the RMX Address book for re-use at a later time. Participant
Properties should inherit their TIP settings from the Conference Profile assigned to the
conference. The following steps outline the process to add a Participant for out-dial purposes.
To configure participant properties:
1 Under the Conferences menu, select New Conference, or select an existing active
conference.
2 On the Participants tab, select New.
a Create a name.
b Set the Type field to SIP.
c Leave the IP Address field at default.
d Set the SIP Address in the format <CUCM Directory Number>@<IP_Address of
CUCM>. Set the Type field to SIP URI. In the following example, 2103 is the Directory
Number (extension) for the CUCM endpoint, and 1.1.1.1 is the IP Address of the
primary call processing CUCM node.