System information

Polycom® Unified Communications Deployment Guide for Cisco Environments
36
c The Send Content to Legacy Endpoints configuration checkbox is disabled if the TIP
Compatibility Mode was set to Video and Content, Verify the ability to change this
setting is disabled.
7 Assign this Conference Profile to an appropriate Meeting Room that will be used for TIP
telepresence conferences with Cisco CTS endpoints.
Task 4: Enabling a Meeting Room for TIP Conferences
Meeting Rooms that are intended for immersive telepresence calls involving TIP, must be
configured with a TIP enabled Conference Profile.
To enable meeting rooms:
1 Under the RMX Management menu, select Meeting Rooms and create a new Meeting
Room or revise an existing one.
2 Under the General tab, ensure that the Profile dropdown associates a Conference Profile
that has been TIP enabled as in Task 3.
See “Creating a New Meeting Room” in the RMX Administrator’s Guide.
Note: No TIP Support on RMX Entry Queues
RMX Entry Queues currently do not support TIP, therefore Meeting Rooms must be
defined for dialing. Alternatively, RMX adhoc or scheduled dial-out can be used.