System information

Polycom® Unified Communications Deployment Guide for Cisco Environments
32
7 In the Outbound Proxy Servers table, do the following:
a Enter the IP address in the Server IP Address or Name field. (The same value as
entered in Step 6a above.)
b Ensure the Port field is set to its default value: 5060. (By default, the Outbound Proxy
Server is the same as the SIP Server.)
8 Ensure the IP Network Service configured in this task is assigned to any Meeting Rooms
that require SIP out-dial to CUCM. This could be via the Default SIP Service designation
or explicit configuration on the Meeting Room itself.
For more information, see “Creating a New Meeting Room“ in the RMX Administrator’s
Guide.
Preparing the RMX to Support TIP Calls (Optional)
If your environment includes Cisco telepresence endpoints, you can configure the Polycom
RMX to support immersive telepresence calls that utilize the TIP protocol.
The following tasks outline the high level configuration steps required to prepare the RMX for
multiscreen immersive telepresence calls.
• Task 1: Confirm the RMX Telepresence Mode License
• Task 2: Setting the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag