System information

Polycom® Unified Communications Deployment Guide for Cisco Environments
iv
Task 2: Ensure the TIP Protocol is Enabled (Optional) ...................................................22
Configuring a Polycom HDX or Immersive System for CUCM Registration ........................23
Task 1: Configure SIP Settings .......................................................................................23
Task 2: Ensure the TIP Protocol is Enabled (Optional) ...................................................24
Defining your Polycom Immersive System in the Cisco TelePresence Server (Optional) ...25
Configuring SIP Integration Between a Polycom RMX System and CUCM .....................26
Configuring CUCM for SIP Integration with RMX ...............................................................26
Task 1: Creating a SIP Profile ........................................................................................27
Task 2: Adding a SIP Trunk ............................................................................................27
Task 3: Adding a Route Pattern ......................................................................................29
Configuring the RMX for CUCM SIP calls ..........................................................................30
Task 1: Enable the RMX for SIP ....................................................................................30
Task 2: Configuring RMX to Route Outbound SIP Calls to CUCM (Optional) .................31
Preparing the RMX to Support TIP Calls (Optional) ...........................................................32
Task 1: Confirm the RMX Telepresence Mode License ..................................................33
Task 2: Setting the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag ....................34
Task 3: Configuring a TIP Enabled Conference Profile ...................................................34
Task 4: Enabling a Meeting Room for TIP Conferences .................................................36
Task 5: Configuring Participant Properties for Dial Out Calls (Optional) .........................37
Task 6: Configuring Polycom MLA for RMX TIP Conferences ........................................38
Task 7: Operations During Ongoing Conferences ..........................................................39
Troubleshooting ..................................................................................................................40
No video in calls between a Cisco endpoint and a Polycom endpoint .............................40
Cisco CTS endpoints cannot connect to the RMX ..........................................................40
Polycom endpoints are not registering to CUCM ............................................................40
Cisco endpoint shows “No bandwidth available” and does not connect to a Polycom
endpoint .........................................................................................................................40
Chapter 4: Polycom RealPresence Platform SIP Integration with CUCM ............... 41
Deployment Model Advantages ..........................................................................................41
Supported Products for Deployment .................................................................................42
Deployment Architecture ....................................................................................................43
Design Considerations ........................................................................................................43
Using Dial Plan ..................................................................................................................43
Using Call Admission Control .............................................................................................43
Content Sharing .................................................................................................................43
Configuring SIP Integration Between a Polycom DMA System and CUCM .....................45
Configuring CUCM for SIP Integration with DMA ...............................................................45
Task 1: Creating a SIP Profile ........................................................................................45
Task 2: Adding a SIP Trunk ............................................................................................48
Task 3: Adding a Route Pattern ......................................................................................50
Configuring DMA for SIP Integration with CUCM ...............................................................51
Task 1: Configuring a SIP Peer ......................................................................................52
Task 2: Setting up a Dial Rule (Optional) ........................................................................54