System information

Polycom® Unified Communications Deployment Guide for Cisco Environments

3 In the Add legacy Cisco CTS endpoint dialog box, complete the following fields:

a In the Name field, enter a name for your Polycom ITP system.

b In the Address field, enter the Directory Number you created for the Primary codec of

your Polycom ITP system.

4 Click Add legacy Cisco CTS endpoint.

Configuring SIP Integration Between a Polycom RMX

System and CUCM

You can configure CUCM to route audio and video calls directly to a Polycom RMX. To enable

this integration, you need to perform steps in both the CUCM and the Polycom RMX system.

For more information about the Cisco Unified Communications Manager, see the

Cisco Unified

Communications Manager Documentation Guide. For more information about Polycom RMX

systems, see the Administrator’s Guide for Polycom RMX Systems.

The following high level configuration tasks will be discussed:

• Configuring CUCM for SIP Integration with RMX

• Configuring the RMX for CUCM SIP Calls

• Preparing the RMX to Support TIP Calls (Optional)

Configuring CUCM for SIP Integration with RMX

Perform the following steps to create a SIP trunk in CUCM to the RMX system and establish the

call routing infrastructure:

• Task 1: Creating a SIP Profile

• Task 2: Adding a SIP Trunk

• Task 3: Adding a Route Pattern