System information

Polycom® Unified Communications Deployment Guide for Cisco Environments
22
Settings
Description
Password Check this box, and two additional fields will appear to enter the
password with which to login. Set this to the Digest Credentials that
were configured in Task2: Adding a System User.
Registrar Server Specify the IP address of the CUCM Call processing subscriber to
which you need to register.
Proxy Server If you leave this field blank, the Registrar Server is used.
Recommended to specify the IP address of the CUCM Call
processing subscriber to which you need to register.
Registrar Server Type Specifies the type of Registrar Server. For CUCM, set this to
Unknown.
4 Click Save.
At this point, your Polycom endpoint should be registered with CUCM.
Task 2: Ensure the TIP Protocol is Enabled (Optional)
If your Polycom endpoint will need to participate in TIP-based calls, check to see that the TIP
license has been applied to your endpoint.
To ensure the TIP protocol is enabled:
1 Open a browser window and in the Address field enter the Polycom Group Series system
IP address or host name.
2 Navigate to Admin Settings > General Settings > Options.
Verify that the TIP license option is included on your system.
If the TIP option is not available, contact your Polycom Sales Representative (as this is a
purchasable option).