System information

Direct Registration of Polycom RealPresence Systems with CUCM
15
Task 3: Creating a SIP Profile
CUCM associates specific SIP parameters with an endpoint or trunk via a SIP Profile. This step
will create a SIP profile in CUCM that can be associated with the Polycom system devices.
To create a SIP Profile:
1 Select Device > Device Settings > SIP Profile.
2 Click Find to see the list of existing SIP Profiles, and select the Standard SIP Profile (a
default in CUCM).
3 Once open, select Copy.
4 Change the Name to something meaningful for your deployment, and then ensure the
following is configured.
Note: Leaving SIP Settings as Default
Most of the SIP settings will likely be left at default; however the CUCM administrator
should be consulted for any SIP settings that may be specific to your deployment.
5 Change the Name to something meaningful for your deployment, and then ensure the
following is configured.
a Use Fully Qualified Domain Name in SIP Requests should be checked.
b Allow Presentation Sharing using BFCP should be checked.
c Early Offer support for voice and video calls should NOT be checked.
The data shown in this section is shown as an example.