System information

Direct Registration of Polycom RealPresence Systems with CUCM
13
5 On Phone Security Profile Information page, complete the following fields:
a In the Name text box, enter a profile name for the system.
b In the Description field, enter a description for the security profile.
c If you want to use digest authentication (recommended), select the Enable Digest
Authentication check box. When you use digest authentication, a valid login password
will be required for devices to register.
d Select the default values for all other fields. This example uses digest authentication.
6 Click the Save button.
In the status bar near the top of the page, Update Successful displays.
Task 2: Adding a System User
You need to create a CUCM system user for each Polycom HDX or Group Series endpoint. For
ITP systems, create a system user for each codec. For example, if you are registering a
Polycom OTX system that has three codecs, you need to create a unique system user for each
codec.
If you cannot add a user here, your system may be LDAP integrated. If that is the case, you can
use an existing user ID (essentially associating the endpoint to an existing user) or have your
LDAP administrator create a new user ID for each codec.
To add a system user:
1 Select User Management > End User.