System information

Direct Registration of Polycom RealPresence Systems with CUCM
11
device. Devices with more complex and high-end capabilities are assigned a higher number of
units compared to devices with basic capabilities. Table 3-3 shows the license units for Polycom
devices. For more information, see your Cisco documentation.
Table 3-3: Required Device License Units
Polycom Device
Required Device License Units
Polycom HDX or Group Series System
Six (6)
Polycom ITP system
Each codec requires device license units when
registered to the Cisco Unified Communications
Manager.
Six (6) per codec
Registering a Polycom RealPresence Immersive, Room,
or Desktop System with a CUCM
To register the Polycom RealPresence system with CUCM, you need to perform steps in both
the CUCM and the Polycom RealPresence system.
For more information about the Cisco Unified Communications Manager, see the
Cisco Unified
Communications Manager Documentation Guide. For more information about Polycom HDX
systems, see the Administrator’s Guide for HDX Systems. For more information on Polycom
Group series, see the Administrator’s Guide for Group Series.
The following high level configuration tasks will be discussed:
• Configuring CUCM for a Polycom Immersive, Room, or Desktop System
• Configuring a Polycom Group Series System for CUCM Registration
• Configuring a Polycom HDX and Immersive System for CUCM Registration
• Defining your Polycom ITP Endpoints in the Cisco TelePresence Server
See the Polycom Immersive Telepresence (ITP) Administrator’s Guide for detailed
documentation on Polycom ITP systems.
Configuring CUCM for a Polycom Immersive, Room, or Desktop System
Use the CUCM web administrator interface to perform the following tasks:
• Task 1: Creating a Security Profile
• Task 2: Adding a System User