Installation guide

show redundancy
GRP Redundant Processor Support 33
Table 4 describes selected fields from the show redundancy command output. Not all fields are
described.
Related Commands
redundancy
redundancy prefer
Table 4 Show Redundancy Field Descriptions
Field Description
Primary GRP in slot 8 Slot containing the primary GRP. The primary slot is determined either by the
arbitration mechanism or by the redundancy prefer EXEC command.
Secondary GRP in slot 1 Slot containing the secondary GRP. The secondary slot is determined by the
arbitration mechanism
Choice of primary due to ... Reason for selecting primary GRP.
Preferred GRP: 9 Preferred primary GRP, selected by the redundancy prefer EXEC command.
In this instance, no GRP is installed in slot 9 so the arbitration mechanism
selected an alternative primary GRP.
Chassis holds: chassis s/n 66300963
config stamp 419
The Cisco 12000 has chassis serial number shown and the last configuration
saved in this chassis has the configuration stamp number shown.
Local GRP holds: chassis s/n
66300963 config stamp 419
The startup configuration on this GRP was saved in chassis serial number
shown, when the chassis configuration stamp was the number shown.
GRP Slot 1: Slot containing the first found GRP. Slot information is repeated for each
found GRP in the chassis.
chassis s/n 66300963 Serial number of the Cisco 12000 chassis.
config stamp 418 Configuration stamp identifier.
IOS 11.2 redundancy v3 Software version identifier.
date 1998-10-01 Date identifier for the arbitration software. The date field is Y2K compliant.
Mem size 128M Amount of memory installed on this GRP.
GRP s/n CAB0147001B Serial number of this GRP.
NOTICE ... Informational message.
Version information for secondary in
slot 1:
Cisco IOS software header information for secondary GRP.
WARNING ... Indicates a potential problem, such as a preferred slot is specified for a GRP
but no GRP is detected in that slot.