Installation guide

show boot
GRP Redundant Processor Support 29
Related Commands
hw-module config-register
redundancy prefer
CONFGEN variable = 419 Configuration sequence number stamp from the Cisco 12000 router chassis in
which the GRP was installed when the startup-config was saved.
Secondary is in slot 1 Location of secondary GRP.
Secondary BOOT variable =
slot0:gsr-p-mz,1;
Location and name of the software image that will boot on the secondary
GRP.
Secondary CONFIG_FILE variable =
nvram:
Location of the router configuration file that the secondary GRP will load.
Secondary BOOTLDR variable = Current value of the BOOTLDR variable.
Secondary configuration register is
0x2
Current content of the configuration register.
Secondary CHASSIS_SN variable =
66300963
Serial number of the Cisco 12000 router chassis in which the GRP was
installed when the startup-config was saved.
Secondary CONFGEN variable =
419
Configuration sequence number stamp from the Cisco 12000 router chassis in
which the GRP was installed when the startup-config was saved.
Table 3 Show Boot Field Descriptions (Continued)
Field Description