Installation guide

redundancy
GRP Redundant Processor Support 25
redundancy
Use the redundancy global configuration command to enter redundancy configuration mode.
redundancy
Syntax Description
This command has no keywords or arguments.
Default
None
Command Mode
Global
Usage Guidelines
This command first appeared in Cisco IOS Release 11.2 GS.
It is not necessary to have two GRP cards installed in the router before you use this command.
After you enter redundancy configuration mode, you can enter the main-cpu command. The
main-cpu command places you in the main-CPU redundancy configuration mode, which allows you
to specify CPU redundancy characteristics.
Example
The following example enters redundancy configuration mode:
router(config)# redundancy
Related Commands
configure
redundancy force-failover
redundancy prefer