Installation guide

hw-module secondary reload
GRP Redundant Processor Support 23
hw-module secondary reload
Use the hw-module secondary reload EXEC command to reload the designated secondary GRP.
hw-module secondary reload
Syntax Description
This command has no keywords or arguments.
Default
None
Command Mode
Privileged EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 11.2 GS.
When the secondary GRP is reloaded, there is no interruption to the primary GRP activity. The
secondary GRP will boot to whatever level is set by means of the configuration register (for example,
only to ROM monitor prompt).
This command executes immediately and does not ask for confirmation.
Example
The following example reloads the secondary GRP from the configuration specified by the cards
boot variables and configuration settings:
hw-module secondary reload
*Oct 2 10:20:36.866: %MBUS-6-MGMTSECRELOAD: Secondary in slot 1 reloaded by operator
command
%MBUS-6-GRP_STATUS: GRP in Slot 1 Mode = MBUS Secondary
Related Commands
redundancy prefer