Installation guide

hw-module boot system
GRP Redundant Processor Support 21
You can also enter several boot system commands to provide a fail-safe method for booting your
router. The router stores and executes the boot system commands in the order in which you enter
them in the configuration file. If you enter multiple boot commands of the same type, the router tries
them in the order in which they appear in the configuration file. If a boot system command entry in
the list specifies an invalid device, the router skips that entry.
Example
The following example instructs the GRP in chassis slot 3 to boot from an image located on the Flash
memory card inserted in PCMCIA slot 0, and the GRP in chassis slot 0 to boot a different image
located on its Flash memory card:
hw-module slot 3 boot system flash slot0:gsr-p-mz
hw-module slot 0 boot system flash slot0:gsr-p-mz.new
Related Commands
hw-module config-register