Datasheet

Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 12
Licensing
Table 4 lists the part numbers that are needed when ordering virtual firewall (security context)
licenses. To be able to order any of these license tiers, you must be running FWSM Software
2.2(1) or higher. No changes in hardware are required when upgrading from FWSM Software 1.1
to versions 2.2, 2.3 and 3.1, 3.2
Table 4. Context License Part Numbers
Part Number Description
FR-SVC-FWM-VC-T1 20 virtual firewall licenses for Cisco FWSM Software 2.2 or above
FR-SVC-FWM-VC-T2 50 virtual firewall licenses for Cisco FWSM Software 2.2 or above
FR-SVC-FWM-VC-T3 100 virtual firewall licenses for Cisco FWSM Software 2.2 or above
FR-SVC-FWM-VC-T4 250 virtual firewall licenses for Cisco FWSM Software 3.1 or above
FR-SVC-FWM-UPGR1 Upgrade from 20 to 50 virtual firewalls for Cisco FWSM Software 2.2 or above
FR-SVC-FWM-UPGR2 Upgrade from 50 to 100 virtual firewalls for Cisco FWSM Software 2.2 or above
FR-SVC-FWM-UPGR3 Upgrade from 100 to 250 virtual firewalls for Cisco FWSM Software 3.1, 3.2
Table 5. GTP/GPRS Mobile Wireless Inspection Licenses
Part Number Description
FR-SVC-FWM-GTP GTP Protocol Inspection Engine license for Cisco FWSM Software 3.1, 3.2
Table 6. System Requirements
Support for FWSM 3.1, 3.2
Supervisor Engines
1
Cisco IOS
12.2(18)SXF and higher 720, 32
12.2(18)SXF2 and higher 2, 720, 32
Catalyst OS
2
8.5(3) and higher 2, 720, 32
Support for FWSM 2.3 and 2.3
FWSM Features:
Supervisor Engines
3
Multiple SVIs Transparent
Firewall with
Failover
Cisco IOS
12.1(13)E 2 No No
12.1(19)E 2 Yes No
12.1(22)E and higher 2 Yes Yes
12.2(14)SY and higher 2 Yes No
12.2(14)SX and higher 2, 720 No No
12.2(17a)SX3 2, 720 Yes Yes
1
The FWSM does not support the supervisor 1 or 1A. FWSM supports Supervisor Engine 2 with Multilayer
Switch Feature Card 2 (MSFC2), Supervisor 32 or Supervisor 720.
2
Supports multiple switched VLAN interfaces (SVIs) between the Multilayer Switch Feature Card (MSFC)
and FWSM. An SVI is a VLAN interface that is routed on the MSFC.
3
Supports transparent firewall mode when you use failover. Failover requires BPDU forwarding to the
FWSM. Other releases that do not support BPDU forwarding only support transparent mode without failover.
3
1
2