Specifications

vii
PA-T3+ Serial Port Adapter Installation and Configuration
OL-3505-03
Preface
This preface describes the objectives and organization of this document and explains how to find
additional information on related products and services. This preface contains the following sections:
• Objectives, page vii
• Organization, page viii
• Related Documentation, page viii
• Obtaining Documentation, page x
• Obtaining Technical Assistance, page xi
• Obtaining Additional Publications and Information, page xiii
Objectives
This document describes how to install and configure the one-port (PA-T3[=]) and the two-port
(PA-2T3[=]) T3+ serial port adapters, hereafter referred to as the PA-T3+, which are used in the
following platforms:
• Catalyst 6000 family FlexWAN module in the Catalyst 6000 family switches
• Cisco 7200 series routers—consisting of the two-slot Cisco 7202, four-slot Cisco 7204 and
Cisco 7204VXR, and six-slot Cisco 7206 and the Cisco 7206VXR
• Cisco 7301 router
• Cisco 7304 PCI Port Adapter Carrier Card in the Cisco 7304 router
• Cisco 7401ASR router
• VIP in Cisco 7500 series and Cisco 7000 series routers with the 7000 Series Route Switch Processor
(RSP7000) and 7000 Series Chassis Interface (RSP7000CI)