Specifications

4-5
PA-T3+ Serial Port Adapter Installation and Configuration
OL-3505-03
Chapter 4 Configuring the PA-T3+
Configuring the Interfaces
Table 4-2 Examples of the show interfaces serial Command
Platform Command Example
Catalyst 6000 family FlexWAN module
in Catalyst 6000 family switches
show interfaces serial, followed
by mod_num/bay/port
(module-slot-number/
port-adapter-bay-number/
interface-port-number)
The example is for interface 0 on a port
adapter in bay 0 of a FlexWAN module in
module slot 3.
Router# show interfaces serial 3/0/0
Serial 3/0/0 is administratively down,
line protocol is down
[Additional display text omitted from
this example]
Cisco 7200 series routers show interfaces serial, followed
by slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a
port adapter in port adapter slot 6.
Router# show interfaces serial 6/0
Serial 6/0 is administratively down,
line protocol is down
[Additional display text omitted from
this example]
Cisco 7301 routers show interfaces serial, followed
by slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a
port adapter in port adapter slot 1.
Router# show interfaces serial 1/0
Serial 1/0 is administratively down,
line protocol is down
[Additional display text omitted from
this example]
Cisco 7304 PCI Port Adapter Carrier
Card in a Cisco 7304 router
show interfaces serial, followed
by slot/port (module-slot-number/
interface-port-number)
The example is for interface 0 on a port
adapter in a Cisco 7304 PCI Port Adapter
Carrier Card in module slot 3 of a Cisco 7304
router.
Router# show interfaces serial 3/0
Serial 3/0 is administratively down,
line protocol is down
[Additional display text omitted from
this example]