Specifications

Contents
iv
PA-T3+ Serial Port Adpater Installation and Configuration
OL-3505-03
Cisco 7301 Router Interface Addresses 1-12
Cisco 7304 PCI Port Adapter Carrier Card Interface Addresses 1-13
Cisco7401ASR Router Interface Addresses 1-13
VIP Interface Addresses 1-13
CHAPTER 2 Preparing for Installation 2-1
Required Tools and Equipment 2-1
Software and Hardware Requirements 2-2
75-Ohm In-Line Coaxial Attenuator 2-3
Checking Hardware and Software Compatibility 2-3
Safety Guidelines 2-3
Safety Warnings 2-3
Electrical Equipment Guidelines 2-8
Telephone Wiring Guidelines 2-9
Preventing Electrostatic Discharge Damage 2-9
CHAPTER 3 Removing and Installing Port Adapters 3-1
Handling Port Adapters 3-1
Online Insertion and Removal 3-2
Warnings and Cautions 3-3
Port Adapter Removal and Installation 3-4
FlexWAN Module—Removing and Installing a Port Adapter 3-5
Cisco 7200 Series—Removing and Installing a Port Adapter 3-6
Cisco 7301 Router—Removing and Installing a Port Adapter 3-7
Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter 3-8
Cisco 7401ASR Router—Removing and Installing a Port Adapter 3-10
VIP—Removing and Installing a Port Adapter 3-11
Connecting a Serial Cable 3-12
CHAPTER 4 Configuring the PA-T3+ 4-1
Using the EXEC Command Interpreter 4-1
Configuring the Interfaces 4-2
Shutting Down an Interface 4-2
Performing a Basic Configuration 4-6
Configuring Timing (Clock) Signals 4-8
Setting the Clock Rate 4-9
Inverting the Clock Signal 4-10
Inverting the Data Signal 4-10