Specifications

5-24
PA-8T-V.35 Synchronous Serial Port Adapter Installation and Configuration
OL-3563-03
Chapter 5 Configuring the PA-8T-V.35 Interfaces
Checking the Configuration
PA Bay 1 Information:
Fast-Serial PA, 4 ports
EEPROM format version 1
HW rev 1.0, Board revision A0
Serial number: 02024473 Part number: 73-1389-05
Catalyst 6000 Family FlexWAN Module
Following is an example of the show diag command that shows a PA-8T-V.35 on a Catalyst 6000 family
FlexWAN module:
Router# show diag
(display text omitted)
Slot 8: Logical_index 17
Board is analyzed ipc ready FlexWAN controller
Slot database information:
Flags: 0x2004Insertion time: unknown
CWAN Controller Memory Size: Unknown
PA Bay 1 Information:
Mx Serial PA, 8 ports
EEPROM format version 0
HW rev 0.00, Board revision UNKNOWN
Serial number: 00000000 Part number: 00-0000-00
Cisco 7200 Series, Cisco 7100 Series, Cisco uBR7200 Series, and Cisco7401ASR Routers
Following is an example of the show diag slot command that shows a PA-8T-V.35 in port adapter slot 1
of a Cisco 7200 series router:
Router# show diag 1
Slot 1:
Mueslix serial (V.35) port adapter, 8 ports
Port adapter is analyzed
Port adapter insertion time 2d09h ago
Hardware revision 255.255 Board revision UNKNOWN
Serial number 4294967295 Part number 255-65535-255
Test history 0xFF RMA number 255-255-255
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0D FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Cisco 7301 Routers
Note Input/output data for the console port, auxiliary port, Gigabit Ethernet ports, and CompactFlash Disk are
listed in the output of the show c7300 command, rather than in the output of the show diag command.
Use the show diag command for port adapter information.
Router# sh diag