Specifications

5-3
PA-8T-V.35 Synchronous Serial Port Adapter Installation and Configuration
OL-3563-03
Chapter 5 Configuring the PA-8T-V.35 Interfaces
Configuring the Interface
When you are done, press Ctrl-Z (hold down the Control key while you press Z) or enter end or exit to
exit configuration mode and return to the EXEC command interpreter.
Table 5-1 Syntax of the shutdown Command
Platform Command Example
Catalyst RSM/VIP2 in
Catalyst 5000 family switches
interface, followed by the type
(serial) and slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 1.
Router(config-if)# interface serial 1/0
Router(config-if)# shutdown
Router(config-if)# interface serial 1/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Catalyst 6000 family FlexWAN
module in Catalyst 6000 family
switches
interface, followed by the type
(serial) and mod_num/bay/port
(module-slot-number/
port-adapter-bay-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
port adapter in port adapter bay 0 of a FlexWAN
module installed in slot 3.
Router(config-if)# interface serial 3/0/0
Router(config-if)# shutdown
Router(config-if)# interface serial 3/0/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7120 series routers interface, followed by the type
(serial) and slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 3.
Router(config-if)# interface serial 3/0
Router(config-if)# shutdown
Router(config-if)# interface serial 3/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7140 series routers interface, followed by the type
(serial) and slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 4.
Router(config-if)# interface serial 4/0
Router(config-if)# shutdown
Router(config-if)# interface serial 4/1
Router(config-if)# shutdown
Ctrl-Z
Router#
Cisco 7200 series routers interface, followed by the type
(serial) and slot/port
(port-adapter-slot-number/
interface-port-number)
The example is for interface 0 and interface 1 on a
port adapter in port adapter slot 6.
Router(config-if)# interface serial 6/0
Router(config-if)# shutdown
Router(config-if)# interface serial 6/1
Router(config-if)# shutdown
Ctrl-Z
Router#