Specifications

vii
PA-8T-V.35 Synchronous Serial Port Adapter Installation and Configuration
OL-3563-03
Preface
This preface describes the objectives and organization of this document and explains how to find
additional information on related products and services. This preface contains the following sections:
• Objectives, page vii
• Organization, page viii
• Related Documentation, page viii
• Obtaining Documentation, page x
• Obtaining Technical Assistance, page xi
• Obtaining Additional Publications and Information, page xiii
Objectives
This document describes how to install and configure the EIA/TIA-V.35 synchronous serial port adapter
(PA-8T-V35[=]), hereafter referred to as the PA-8T-V.35, which is used in the following platforms:
• Catalyst 5000 family switches with the Route Switch Module (RSM)/second-generation Versatile
Interface Processor (VIP2)
• Catalyst 6000 family switches with the Catalyst 6000 family FlexWAN module
• Cisco 7100 series routers—which consist of the Cisco 7120 series and Cisco 7140 series
• Cisco 7200 series routers—which consist of the two-slot Cisco 7202, four-slot Cisco 7204 and
Cisco 7204VXR, and the six-slot Cisco 7206 and the Cisco 7206VXR
• Cisco uBR7200 series universal broadband routers—which consist of the six-slot Cisco uBR7246
and the three-slot Cisco uBR7223
• Cisco 7301 router
• Cisco 7304 PCI Port Adapter Carrier Card in the Cisco 7304 router
• Cisco 7401ASR router
• VIP in Cisco 7500 series and Cisco 7000 series routers with the 7000 series Route Switch Processor
(RSP7000) and 7000 series Chassis Interface (RSP7000CI)