Specifications

ManualsBrandsCisco ManualsPrint & ScanFourth-Generation Versatile Interface Processor VIP4

viii

Cisco PA-FE-TX and Cisco PA-FE-FX Fast Ethernet 100BASE-T Port Adapter Installation and Configuration

OL-2899-02

Preface

Organization

This document contains the following chapters:

Related Documentation

Your router and the Cisco IOS software running on it contain extensive features and functionality, which

are documented in the following resources:

• Cisco IOS software:

For configuration information and support, refer to the modular configuration and modular

command reference publications in the Cisco IOS software configuration documentation set that

corresponds to the software release installed on your Cisco hardware.

Note You can access Cisco IOS software configuration and hardware installation and

maintenance documentation on the World Wide Web at http://www.cisco.com. Traslated

docuemntation is available at http://www.cisco.com/public/countries_languages.html.

• Catalyst RSM/VIP2:

For hardware installation and maintenance information, refer to the following publications:

–

Route Switch Module Catalyst VIP2-15 and VIP2-40 Installation and Configuration Note

–

Catalyst 5000 Series Route Switch Module Installation and Configuration Note

–

The installation and configuration guide that shipped with your Catalyst 5000 family switch

• Cisco 7100 series routers:

–

For hardware installation and maintenance information, refer to the Cisco 7100 Series VPN

Router Installation and Configuration Guide that shipped with your Cisco 7100 series router.

–

For information on setting up a Virtual Private Network, refer to the Cisco 7100 Series VPN

Configuration Guide.

• Cisco 7200 series routers:

–

For port adapter hardware and memory configuration guidelines, refer to the Cisco 7200 Series

Port Adapter Hardware Configuration Guidelines.

Section Title Description

Chapter 1 Overview Describes the PA-FE-TX and PA-FE-FX and their

LED displays, cables, and receptacles.

Chapter 2 Preparing for Installation Describes safety considerations, tools required,

and procedures you should perform before the

actual installation.

Chapter 3 Removing and Installing

Port Adapters

Describes the procedures for installing and

removing PA-FE-TX and PA-FE-FX port adapters

in the supported platforms.

Chapter 4 Configuring the PA-FE-TX or

PA-FE-FX

Provides instructions for configuring

port adapters on the supported platforms.