Specifications

4-12

Cisco PA-FE-TX and Cisco PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration

OL-2899-02

Chapter 4 Configuring the PA-FE-TX or PA-FE-FX

Checking the Configuration

System restarted by reload

System image file is “slot0:c7401ASR-j-mz.960421”, booted via slot0

cisco 7401ASR (R4700) processor with 22528K/10240K bytes of memory.

R4700 processor, Implementation 33, Revision 1.0 (Level 2 Cache)

Last reset from power-on

Bridging software.

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

Chassis Interface.

4 Ethernet/IEEE 802.3 interfaces.

2 FastEthernet/IEEE 802.3 interfaces.

125K bytes of non-volatile configuration memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

8192K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x2

Cisco 7500 Series Routers with VIP—Example Output of the show version Command

Following is an example of the show version command from a Cisco 7500 series router with a VIP2:

Router# show version

Cisco Internetwork Operating System Software

IOS (tm) GS Software (RSP-A), Version 11.1(6)CA

Compiled Fri 06-Oct-95 12:22 by mpo

Image text-base: 0x600088A0, data-base: 0x605A4000

ROM: System Bootstrap, Version 5.3(16645) RELEASED SOFTWARE

ROM: GS Bootstrap Software (RSP-BOOT-M), Version 11.1(6)CA, RELEASED SOFTWARE

honda uptime is 4 hours, 22 minutes

System restarted by reload

System image file is “slot0:rsp-a111-1”, booted via slot0

cisco RSP2 (R4600) processor with 32768K bytes of memory.

R4600 processor, Implementation 32, Revision 2.0

Last reset from power-on

G.703/E1 software, Version 1.0.