Specifications

vii
Cisco PA-FE-TX and Cisco PA-FE-FX Fast Ethernet 100BASE-T Port Adapter Installation and Configuration
OL-2899-02
Preface
This preface describes the objectives and organization of this document and explains how to find
additional information on related products and services. This preface contains the following sections:
• Objectives, page vii
• Organization, page viii
• Related Documentation, page viii
• Obtaining Documentation, page x
• Obtaining Technical Assistance, page xi
• Obtaining Additional Publications and Information, page xiii
Objectives
This document describes how to install and configure the 100BASE-TX and 100BASE-FX port adapters
(PA-FE-TX[=] and PA-FE-FX[=]), hereafter referred to as the PA-FE-TX or the PA-FE-FX, which is
used in the following platforms:
• Catalyst 5000 family switches with the Route Switch Module (RSM)/second-generation Versatile
Interface Processor (VIP2)
• Cisco 7100 series routers, consisting of the Cisco 7120 series and Cisco 7140 series
• Cisco 7200 series routers, consisting of the 2-slot Cisco 7202, 4-slot Cisco 7204 and
Cisco 7204VXR, and the 6-slot Cisco 7206 and Cisco 7206VXR
• Cisco uBR7200 series universal broadband routers, consisting of the 6-slot Cisco uBR7246 and
Cisco uBR7246VXR and the 3-slot Cisco uBR7223
• Cisco 7301 router
• Cisco 7401ASR router
• Versatile Interface Processor (VIP) in Cisco 7500 series and Cisco 7000 series routers with the 7000
Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI)