Specifications

1-8

Cisco PA-FE-TX and Cisco PA-FE-FX Fast Ethernet 100BASE-T Port Adapter Installation and Configuration

OL-2899-02

Chapter 1 Overview

Port Adapter Slot Locations on the Supported Platforms

This section discusses port adapter slot locations on the supported platforms. The illustrations that

follow summarize slot location conventions on each platform:

• Catalyst 5000 Family Switches with RSM/VIP2 Slot Numbering, page 1-9

• Cisco 7000 Series Routers with VIP Slot Numbering, page 1-12

• Cisco 7100 Series Routers Slot Numbering, page 1-14

• Cisco 7200 Series Routers, Cisco 7200 VXR Routers, and Cisco uBR7200 Series Routers Slot

Numbering, page 1-15

• Cisco 7301 Router Slot Numbering, page 1-19

• Cisco 7401ASR Router Slot Numbering, page 1-20

• Cisco 7500 Series Routers with VIP Slot Numbering, page 1-20

Table 1-3 MII Connector Pinout

1. Any pins not indicated are not used.

In Out In/Out Description

14–17 – Yes – Transmit Data (TxD)

12 Yes –– Transmit Clock (Tx_CLK)

2. Tx_CLK and Rx_CLK are generated by the external transceiver.

11 – Yes – Transmit Error (Tx_ER)

13 – Yes – Transmit Enable (Tx_EN)

3 – Yes – MII Data Clock (MDC)

4–7Yes–– Receive Data (RxD)

9Yes–– Receive Clock (Rx_CLK)

10 Yes –– Receive Error (Rx_ER)

8Yes–– Receive Data Valid (Rx_DV)

18 Yes –– Collision (COL)

19 Yes –– Carrier Sense (CRS)

2 –– Yes MII Data Input/Output (MDIO)

22–39 –– – Common (ground)

1, 20, 21, 40 –– – +5.0 volts (V)