Datasheet

Ordering Guide

FLASR1-SBC-4K(=)

FLASR1-SBC-16K(=)

Examples

The following examples illustrate how to build a configuration with part numbers for certain network

deployments.

Note: These examples are neither exhaustive nor should they be used exactly as presented. You

should customize your order based on your needs.

Example 1: Cisco ASR 1000 Series Router as a Broadband Aggregation Router

In this example, a Cisco ASR 1000 Series Router is used for broadband aggregation, such as a

Point-to-Point Termination and Aggregation (PTA), or as a IPoE BRAS, or as a L2TP Access

Concentrator (LAC), or as a L2TP Network Server (LNS), or as a L2TP Tunnel Switch (L2TS). A 6RU

chassis (ASR1006) with redundant RP2s and 20-Gbps ESPs is configured in order to achieve six-9’s

High Availability. The Cisco ASR 1000 Series RP2 comes by default with an 80-GB hard disk. Three

SIP cards are ordered to host 2 double-height 10 Gigabit Ethernet (GE) SPA cards and 4 single-

height 8 Gigabit Ethernet (GE) SPA cards.

The Cisco IOS XE Advanced IP Services consolidated package facilitates broadband and

Multiprotocol Label Switching (MPLS) features on the router.

A 32,000-subscriber broadband number-of-session license and the broadband RTU license let you

scale up to 32,000 subscribers on the system.

Table 2 lists the part numbers for deployment of this scenario.

Table 2. Cisco ASR 1000 Series Router as a Broadband Aggregation Router

Part Number Product Description Quantity

ASR1006 Cisco ASR1006 Chassis, Dual P/S 1

ASR1006-PWR-AC Cisco ASR1006 AC Power Supply 2

Part number depends on

required power cable

Power Cable 2

ASR1000-RP2 Cisco ASR1000 Route Processor 2, 8GB DRAM 2

M-ASR1K-HDD-80GB Cisco ASR1000 RP2 80GB HDD 2

ASR1000-ESP20 Cisco ASR1000 Embedded Services Processor, 20Gbps 2

ASR1000-SIP10 Cisco ASR1000 SPA Interface Processor 10 3

SPA-1X10GE-L-V2 Cisco 1-Port 10GE LAN-PHY Shared Port Adapter 2

XFP-10GLR-OC192SR Multirate XFP module for 10GBASE-LR and OC192 SR-1 2

SPA-8X1GE-V2 Cisco 8-Port Gigabit Ethernet Shared Port Adapter 4

SFP-GE-L 1000BASE-LX/LH SFP (DOM) 32

SASR1R2-AISK9-23 Cisco ASR1000 Series RP2ADVANCED IP SERVICES 1

FLASR1-BB-RTU Broadband Right-To-Use Feature License for ASR1000 Series 1

FLASR1-BB-32K Broadband 32K Sessions Feature License for ASR1000 Series 1

Alternatively, the ASR1006 broadband bundles can be used to build the same BOM, as shown

below.

Table 3. Cisco ASR 1000 Series Router as a Broadband Aggregation Router (with bundle PID)

Part Number Product Description Quantity