Manualshelf

Datasheet

ManualsBrandsCisco Manualschassis componentsFAN-MOD-6HS=
251252253254255256257258259260
258
Release Notes for Cisco IOS Release 12.1E on the Catalyst 6500 and Cisco 7600 Supervisor Engine and MSFC
OL-2310-11
Caveats
Resolved OSM Caveats in Release 12.1(13)E17
None.
Resolved OSM Caveats in Release 12.1(13)E16
None.
Resolved OSM Caveats in Release 12.1(13)E15
• An OSM might be reset following an online insertion and removal (OIR) of a Switch Fabric Module
(SFM) or during periods of heavy traffic. This problem is resolved in Release 12.1(13)E15.
(CSCin37112)
• Traffic loss might occur on OSMs when there are frequent OIRs. This problem is resolved in
Release 12.1(13)E15. (CSCee54642)
• Multicast 127-byte UDP packets that egress from OSM-2OC12-POS interfaces have invalid
checksums. This problem is resolved in Release 12.1(13)E15. (CSCec72798)
Resolved OSM Caveats in Release 12.1(13)E14
• Occasionally, OSM POS interfaces stop updating statistics while traffic is passing. This problem is
resolved in Release 12.1(13)E14. (CSCea78519)
Resolved OSM Caveats in Release 12.1(13)E13
• Directed broadcasts to a destination network that is part of an MPLS VPN fail.This problem is
resolved in Release 12.1(13)E13. (CSCec75499)
Resolved OSM Caveats in Release 12.1(13)E12
• An ATM OSM module does not route packets between bridged RFC 1483 PVCs that are configured
in different VLANs. This problem is resolved in Release 12.1(13)E12. (CSCea84940)
• An E3 link to an OC-12 channelized OSM might not come up. This problem is resolved in
Release 12.1(13)E12. (CSCec39689)
Resolved OSM Caveats in Release 12.1(13)E11
None.
Resolved OSM Caveats in Release 12.1(13)E10
• Following a reload, it is safe to ignore this message from OSM-2OC12-POS-MM,
OSM-2OC12-POS-SI, or OSM-2OC12-POS-SL modules in a fully loaded chassis:
%SM-SP-4-BADEVENT: Event 'dnld_completed' is invalid for the current state
'online': scp_dnld_module 4
This problem is resolved in Release 12.1(13)E10. (CSCdw10533)
• A reload might occur if there are multiple sessions configuring an ATM interface at the same time.
This problem is resolved in Release 12.1(13)E10. (CSCdr61944)