Datasheet

ManualsBrandsCisco Manualschassis componentsFAN-MOD-6HS=

Release Notes for Cisco IOS Release 12.1E on the Catalyst 6500 and Cisco 7600 Supervisor Engine and MSFC

OL-2310-11

Supported Hardware

Distributed Forwarding Card

Note • Supported only with Supervisor Engine 2.

• Supported only in 6500-series chassis.

• Requires Switch Fabric Module.

Supervisor Engine 1 with MSFC1 or MSFC2

Note

• Not supported in Release 12.2(27b)E2 and later releases.

• Memory and ROMMON can be upgraded (see the “Memory Requirements and Recommendations” section on page 6).

WS-X6K-S1A-MSFC2 2.90 A Supervisor Engine 1 with ROMMON version 5.2(1) or later,

dual-port 1000BASE-X GBIC uplinks,

QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t,

Number of ports: 2

Number of port groups: 1

Port ranges per port group: 1–2

Policy Feature Card (PFC),

and Multilayer Switch Feature Card 2 (MSFC2)

12.1(2)E

With CWDM-GBIC and WS-G5483 GBIC support 12.1(13)E

With DWDM-GBIC support 12.1(20)E2

WS-X6K-SUP1A-MSFC 3.30 A Supervisor Engine 1 with ROMMON release 5.2(1) or later, dual-port

1000BASE-X GBIC uplinks,

QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t,

Number of ports: 2

Number of port groups: 1

Port ranges per port group: 1–2

Policy Feature Card (PFC)

and Multilayer Switch Feature Card 1 (MSFC1)

12.1(1)E

With CWDM-GBIC and WS-G5483 GBIC support 12.1(13)E

With DWDM-GBIC support 12.1(20)E2

Product Number

(append with “=” for spares)

Power

Required Product Description

Minimum

Software

Version