Instant EtherFast ® Series EtherFast 10/100 Autosensing Workgroup Switch ® Use This User Guide To Install These Linksys Products • EtherFast ® 10/100 5-Port Workgroup Switch (EZXS55W) • EtherFast ® 10/100 8-Port Workgroup Switch (EZXS88W) User Guide
COPYRIGHT & TRADEMARKS Copyright © 2000 Linksys, All rights reserved. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every EtherFast 10/100 Autosensing 5-Port and 8-Port Workgroup Switch is free from physical defects in material and workmanship under normal use for five (5) years from the date of purchase.
EtherFast 10/100 Autosensing Switches Contents Introduction Introduction Your EtherFast 10/100 Autosensing Workgroup Switch 1 1 Hardware Installation Planning Your Network Layout Installing Your Switch Tips on Switching Your Network 2 2 4 6 About Fast Ethernet History of Fast Ethernet Switches versus Hubs Types of Ethernet Cabling Appendix Specifications Environmental Specifications Customer Support 7 7 8 10 12 12 12 13 Your EtherFast 10/100 Autosensing Workgroup Switch Congratulations on purchasin
Instant EtherFast ® Series Hardware Installation EtherFast 10/100 Autosensing Switches Configuration A shows one possible way to set up an EtherFast Switch in a Fast Ethernet environment. Note that the Switch requires Category 5 UTP network cabling for all its connections, like all Fast Ethernet network hardware. Planning Your Network Layout Building a Fast Ethernet network involves more topology rules in addition to the 10BaseT network rules.
Instant EtherFast ® Series EtherFast 10/100 Autosensing Switches Installing Your Switch Powering On the Switch Package Contents Plug in the Switch's AC power adapter. Each time your Switch powers up, it will run a Diagnostic/Self-Test. After the test, the Power LED will light up. As connections to the Switch’s LEDs are powered on, each port's corresponding Link/Act LED will light up. The remaining LEDs will also light up according to how your data is being transferred, e.g.
Instant EtherFast ® Series Tips on Switching Your Network Here are some of the ways your new EtherFast 10/100 Switch can help you optimize your network speed. • Speed up Nodes From Your 10BaseT Network In a 10BaseT network, connect your hubs, file servers and key users such as managers and network administrators directly to your Switch to channel dedicated bandwidth in full duplex mode to each station.
Instant EtherFast ® Series Switches versus Hubs Your EtherFast 10/100 Switch boosts your network performance several times over, conserving your time, money and resources. The scalability of your Switch, its full duplex data transfer and dedicated bandwidth all contribute to maximizing efficiency in your Fast Ethernet network.
Instant EtherFast ® Series Types of Ethernet Cabling EtherFast 10/100 Autosensing Switches Straight-Through Twisted Pair Wiring Twisted-pair cabling comes in various grades, or categories. Category 5 is required for Fast Ethernet, and is also the most reliable and most commonly used type of cabling. You can buy Category 5 UTP (Unshielded Twisted Pair) cabling in precrimped lengths, or you can crimp your own.
Instant EtherFast ® Series Appendix Customer Support Specifications Model Numbers Standards Protocol Ports Speed Per Port (Mbps) MAC Addresses Max Frame Size Buffer Memory Cabling Type LED Display EtherFast 10/100 Autosensing Switches EZXS55W EZXS88W IEEE 802.3 (10BaseT), IEEE 802.
