Setup guide

Installation & Setup

5. In the Select site window, double-click EDGE:

6. In the Select page window, double-click the desired home page.

For instance:

• Home.mpf, if you have two 1600 × 1200 monitor

• HomeEDGE4.mpf, if you have a 4-input head-end and two 1600 × 1200 monitor

• Home1280x1024.mpf, for a single monitor with a resolution of 1280 × 1024

• Home_1600x1050x2.mpf, if you have two 1600 × 1050 monitors in Multiple Monitor

mode

• HomeEDGE4_1600x1050x2.mpf, if you have a 4-input head-end and two 1600 × 1050 monitors in

Multiple Monitor mode

The current version of iControl Edge includes three sets of pre-configured single-screen and

double-screen home pages: one set for systems with typically 4 set-top boxes, another one for systems

Note: You may see other versions of the EDGE Web site. These are backups of previous versions

that were saved when updating the Web site, and could be useful should you need to revert to an

older version.

1. Multiple Monitor mode is when you have two monitors connected to one PC and you expand your primary display to the sec-

ond monitor.