Setup guide

48
Installation & Setup
33
9. In the Video section, make sure Enabled is set to “Yes”.
10. In the Video section, select the encoding, frame rate, and video quality as follows:
11. In the Audio section, make sure the Enabled setting is “Yes”.
12. In the Audio section, set Encoding to “MAC2 - 44100 samp./sec, 16 bit, stereo”
13. Click Apply.
14. Click the Compression link in the navigation bar near the top of the Streaming Encoder Configuration
page.
Parameter Recommended value
Encoding MVC3 -- 640x480
Framerate 15 (or less)
Video quality 9.0