Installation guide

4-41

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 4 Configuring Virtual Contexts

Managing Resource Classes

• Adding Resource Classes, page 4-38

• Modifying Resource Classes, page 4-40

• Deleting Resource Classes, page 4-41

• Viewing Resource Class Use on Virtual Contexts, page 4-41

Deleting Resource Classes

Note This functionality is available for only Admin contexts.

Use this procedure to remove resource classes from the ACE Appliance Device Manager database.

Note When you remove a resource class from the ACE Appliance Device Manager, any virtual contexts that

were associated with this resource class automatically become members of the default resource class.

The default resource class allocates a minimum of 0.00% to a maximum of 100.00% of all ACE

appliance resources to each context. You cannot modify the default resource class.

Because of the impact of resource class deletion on virtual contexts, we recommend that you view a

resource class’s current deployment before deleting it. See the “Viewing Resource Class Use on Virtual

Contexts” section on page 4-41.

Procedure

Step 1 Choose Config > Virtual Contexts > admin context > System > Resource Class.

The Resource Classes table appears.

Step 2 Choose the resource class you want to remove, and then click Delete.

A window appears, asking you to confirm the deletion.

Step 3 Click OK to continue deleting the resource class or click Cancel to keep the resource class.

The Resource Classes table refreshes with the updated information.