Installation guide

4-10
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 4 Configuring Virtual Contexts
Configuring Virtual Contexts
Network Network configuration options allow you to
configure:
• Port channel interfaces
• Gigabit Ethernet interfaces
• VLAN interfaces
• BVI interfaces
• Network Address Translation (NAT) pools for a
VLAN interface
• Static routes
• DHCP relay agents
Note You can configure port channel and Gigabit
Ethernet interfaces only in an Admin context.
• Configuring Virtual Context BVI Interfaces,
page 10-23
• Configuring Gigabit Ethernet Interfaces,
page 10-5
• Configuring Virtual Context VLAN Interfaces,
page 10-10
• Configuring Virtual Context BVI Interfaces,
page 10-23
• Configuring VLAN Interface NAT Pools and
Displaying NAT Utilization, page 10-32
• Configuring Virtual Context Static Routes,
page 10-34
• Configuring Global IP DHCP, page 10-35
High
Availability
High Availability (HA) attributes allow you to
configure two ACE appliances for fault-tolerant
redundancy.
Note You can set up high availability only in an
Admin virtual context.
• Configuring High Availability, page 11-1
• Configuring High Availability Peers, page 11-8
• Configuring ACE High Availability Groups,
page 11-11
HA Tracking
And Failure
Detection
HA Tracking And Failure Detection attributes allow
you to configure tracking processes that can help
ensure reliable fault tolerance.
• High Availability Tracking and Failure
Detection Overview, page 11-17
• Tracking VLAN Interfaces for High
Availability, page 11-19
• Tracking Hosts for High Availability,
page 11-20
Expert Expert options allow you to:
• Configure traffic policies for filtering and
handling traffic received by or passing through
the ACE appliance.
• Configure optimization action lists.
• Configure HTTP header modify action lists.
• Configuring Traffic Policies, page 12-1
• Configuring an HTTP Optimization Action
List, page 13-3
• Configuring an HTTP Header Modify Action
List, page 12-90
Table 4-2 ACE Appliance and Virtual Context Configuration Options (continued)
Configuration
Subset Description Related Topics