Installation guide

13-6
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-2
Chapter 13 Configuring Application Acceleration and Optimization
Configuring Optimization Parameter Maps
Configuring Optimization Parameter Maps
Use this procedure to configure an Optimization parameter map for use with a Layer 3/Layer 4 policy
map.
Tip You can also configure optimization parameter maps when configuring a virtual server. For more
information, see Configuring Application Acceleration and Optimization, page 5-57.
Procedure
Step 1 Select Config > Virtual Contexts > context > Load Balancing > Parameter Maps > Optimization
Parameter Maps. The Parameter Maps table appears.
Step 2 Click Add to add a new parameter map, or select an existing parameter map, and then click Edit to
modify it. The Optimization Parameter Map configuration screen appears.
Step 3 In the Parameter Name field, enter a unique name for this parameter map. Valid entries are unquoted text
strings with no spaces and a maximum of 32 alphanumeric characters.
Step 4 Click Optimization. Optimization attributes appear.
Step 5 Configure optimization using the information in Table 8-5.
Step 6 Do the following:
• Click Deploy Now to save your entries. The ACE appliance validates the parameter map
configuration and deploys it.
• Click Cancel to exit this procedure without saving your entries and to return to the Parameter Map
table.
• Click Next to accept your entries and to add another parameter map.
Related Topics
• Optimization Traffic Policies and Typical Configuration Flow, page 13-2
• Configuring an HTTP Optimization Action List, page 13-3
• Configuring Traffic Policies for HTTP Optimization, page 13-6
• Configuring Global Application Acceleration and Optimization, page 13-9
Configuring Traffic Policies for HTTP Optimization
Table 13-2 provides a high-level overview of the steps required to configure HTTP optimization on an
ACE appliance.
Note Table 13-2 includes only the significant steps in each task. For detailed information on configuring these
items, select the links provided, click Help in the ACE Appliance Device Manager GUI, or refer to
Configuring Traffic Policies, page 12-1.