Installation guide

12-85

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 12 Configuring Traffic Policies

Configuring Rules and Actions for Policy Maps

Step 10 Do the following:

• Click Deploy Now to deploy the configuration on the ACE. The screen refreshes and the Action

table appears. To define the actions for this rule, continue with Step 11.

• Click Cancel to exit this procedure without saving your entries and to return to the Rule table.

• Click Next to deploy your entries and to configure another rule.

Note If you selected the Insert Before option in Step 8 and specified True, perform the following steps

to refresh the Rule tab before adding an action for this rule:

1. Click the Rule tab to refresh the Rule table.

2. In the Rule table, select the newly added rule.

When the screen refreshes, an empty action list appears.

Step 11 In Action table, click Add to add a new action, or select an existing action, and then click Edit to modify

it. The Action configuration screen appears.

Step 12 In the ID field, accept the automatically incremented entry or assign a unique identifier for this action.

Step 13 In the Action Type field, confirm that Reset is selected.

Step 14 In the Action Log field, specify whether the action taken is to be logged.

• N/A—This option is not configured.

• False—Dropped packets are not to be logged in the software.

• True—Dropped packets are to be logged in the software.

Step 15 Do the following:

• Click Deploy Now to deploy this configuration on the ACE.

• Click Cancel to exit the procedure without saving your entries and to return to the Action table.

• Click Next to deploy your entries and to configure another action.