Installation guide

12-72

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 12 Configuring Traffic Policies

Configuring Rules and Actions for Policy Maps

Step 7 In the Insert Before field, indicate whether this rule is to precede another rule for this policy map.

• N/A—This option is not configured.

• False—This rule is not to precede another rule in this policy map.

• True—This rule is to precede another rule in this policy map.

If you select True in the Insert Before field, the Insert Before Policy Rule field appears. Select the

rule that you want the current rule to precede.

Step 8 Do the following:

• Click Deploy Now to deploy this configuration. The screen refreshes and the Action table appears.

To enter actions for this rule, continue with Step 9.

• Click Cancel to exit this procedure without saving your entries and to return to the Rule table.

• Click Next to deploy your entries and to configure another rule.

Note If you selected the Insert Before option in Step 7 and specified True, perform the following steps

to refresh the Rule tab before adding an action for this rule:

1. Click the Rule tab to refresh the Rule table.

2. In the Rule table, select the newly added rule.

When the screen refreshes, an empty action list appears.

Step 9 In the Action table, click Add to add an entry or select an existing entry to modify, and then click Edit.

Step 10 In the Id field, accept the automatically incremented entry or assign a unique identifier for this action.

Step 11 In the Action Type field, configure actions for this rule using the information in Table 12-22.

Step 12 Do the following:

• Click Deploy Now to deploy this configuration on the ACE.

• Click Cancel to exit the procedure without saving your entries and to return to the Action table.

• Click Next to deploy your entries and to configure another action.