Installation guide

12-68

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 12 Configuring Traffic Policies

Configuring Rules and Actions for Policy Maps

• Click Deploy Now to deploy this configuration. The screen refreshes and the Action table appears.

Continue with Step 7.

• Click Cancel to exit this procedure without saving your entries and to return to the Rule table.

• Click Next to deploy your entries and to add another rule.

Note If you selected the Insert Before option in Step 5 and specified True, perform the following steps

to refresh the Rule tab before adding an action for this rule:

1. Click the Rule tab to refresh the Rule table.

2. In the Rule table, select the newly added rule.

When the screen refreshes, an empty action list appears.

Step 7 In the Action table, click Add to add an entry or select an existing entry to modify, and then click Edit.

Step 8 In the Id field, accept the automatically incremented entry or assign a unique identifier for this action.

Step 9 In the Action Type field, configure actions for this rule using the information in Table 12-22.

Step 10 Do the following:

• Click Deploy Now to deploy this configuration on the ACE.

• Click Cancel to exit the procedure without saving your entries and to return to the Action table.

• Click Next to deploy your entries and to configure another action.