Installation guide

12-59
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 12 Configuring Traffic Policies
Configuring Rules and Actions for Policy Maps
• A class map has been defined for a class map rule if you do not want to use the class-default class
map.
Procedure
Step 1 Choose Config > Virtual Contexts > context > Expert > Policy Maps. The Policy Maps table appears.
Step 2 In the Policy Maps table, select the HTTPS traffic policy map you want to set rules and actions for. The
Rule table appears.
Step 3 In the Rule table, click Add to add a new rule, or select the rule you want to modify, and then click Edit.
The Rule screen appears.
Step 4 In the Type field, configure rules using the information in Table 12-21.
Table 12-23 HTTPS Server Load Balancing Policy Map Rules
Option Description
Class Map A class map is used for this traffic policy.
1. To use the class-default class map, check the Use Class Default check box.
The class-default class map is a reserved, well-known class map created by the ACE. You cannot
delete or modify this class. All traffic that fails to meet the other matching criteria in the named class
map belongs to the default traffic class. If none of the specified classifications matches the traffic,
then the ACE performs the action specified by the class-default class map. The class-default class
map has an implicit match any statement that enables it to match all traffic.
2. To use a previously created class map:
a. Clear the Use Class Default check box.
b. In the Class Map Name field, select the class map to be used.
Match Condition A match condition is used for this traffic policy.
Match Condition Name Enter a name for this match condition. Valid entries are unquoted text strings
with no spaces and a maximum of 64 alphanumeric characters.