Installation guide

12-55
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 12 Configuring Traffic Policies
Configuring Rules and Actions for Policy Maps
Step 3 In the Rule table, click Add to add a new rule, or select the rule you want to modify, and then click Edit.
The Rule screen appears.
Step 4 In the Type field, configure rules using the information in Table 12-21.
Table 12-21 Generic Server Load Balancing Policy Map Rules
Option Description
Class Map A class map is used for this traffic policy.
1. To use the class-default class map, check the Use Class Default check box.
The class-default class map is a reserved, well-known class map created by the ACE. You cannot
delete or modify this class. All traffic that fails to meet the other matching criteria in the named class
map belongs to the default traffic class. If none of the specified classifications matches the traffic,
then the ACE performs the action specified by the class-default class map. The class-default class
map has an implicit match any statement that enables it to match all traffic.
2. To use a previously created class map:
a. Clear the Use Class Default check box.
b. In the Class Map Name field, select the class map to be used.