Installation guide

12-35
Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance
OL-26645-02
Chapter 12 Configuring Traffic Policies
Configuring Virtual Context Policy Maps
Use this procedure to create a policy map for a virtual context.
Procedure
Step 1 Choose Config > Virtual Contexts > context > Expert > Policy Maps. The Policy Maps table appears.
Step 2 Click Add to add a new policy map, or select an existing policy map, and then click Edit to modify it.
Step 3 The Policy Map Name field contains an automatically incremented number for the policy map. Either
leave the entry as it is or enter a different, unique number.
Step 4 In Type, select the type of policy map to create. See Table 12-15 for a list of policy maps.
Step 5 In the Description field, enter a brief description of the policy map.
Step 6 Do the following:
Layer 7 HTTP Optimization
(First-Match)
Layer 7 policy map for optimizing HTTP traffic Setting Policy Map Rules and Actions
for Layer 7 HTTP Optimization,
page 12-86
Layer 7 Server Load Balancing
(First-Match)
Layer 7 policy map for HTTP server load
balancing
Setting Policy Map Rules and Actions
for Layer 7 Server Load-Balancing
Traffic, page 12-46
Server Load Balancing - Generic
(First-Match)
Generic Layer 7 policy map for server load
balancing
Setting Policy Map Rules and Actions
for Generic Server Load Balancing,
page 12-54
Server Load Balancing - HTTPS
(First-Match)
Layer 7 policy map for HTTPS server load
balancing
Note The SLB HTTPS (First-Match) option
is not available with the ACE NPE
software version (see the “Information
About the ACE No Payload Encryption
Software Version” section on page 1-2).
Setting Policy Map Rules and Actions
for HTTPS Server Load Balancing,
page 12-58
Server Load Balancing - RADIUS
(First-Match)
Layer 7 policy map for RADIUS server load
balancing
Setting Policy Map Rules and Actions
for RADIUS Server Load Balancing,
page 12-63
Server Load Balancing - RDP
(First-Match)
Layer 7 policy map for RDP server load
balancing
Setting Policy Map Rules and Actions
for RDP Server Load Balancing,
page 12-71
Server Load Balancing - RTSP
(First-Match)
Layer 7 policy map for RTSP server load
balancing
Setting Policy Map Rules and Actions
for RTSP Server Load Balancing,
page 12-65
Server Load Balancing - SIP
(First-Match)
Layer 7 policy map for SIP server load
balancing
Setting Policy Map Rules and Actions
for SIP Server Load Balancing,
page 12-68
Table 12-15 Policy Maps (continued)
Policy Map Description Related Topic